Intellinet-network-solutions 509077 Bedienungsanleitung Seite 1

1-Port MFP USBWireleSSPrint Server USerManUal MODEL 509077 INT-509077-UM-0508-01

EXAMPLE: EPSON CX-8400/9400 Series UtilitiesWindows XP Scanning Utility10USING YOUR ALL-IN-ONE PRINTER

2.3 Reading Memory CardsYou can read the les from a memory card through the MFP print server.3. MFP Manager3.1 MFP Server ListMFP Manager can auto

MFP Server ListMFP Server List The MFP server list will list all the MFP servers within the network. You can nd information about the MFP servers, in

3.2 My FavoriteYou can add frequently used MFP print servers to the My Favorite list. The MFP print servers in the list will be added to the quick li

3.3 Auto Connect ListTo let the system occupy the MFP server automatically when you want to print adocument, you can add the all-in-one printer to yo

2. The MFP servers within the network will be displayed. Select the MFP server you’d like to add to the list.3. Select the all-in-one printe

Quick SetupStatus The current status of the all-in-one printer will be displayed here. “Connected” indicates that you are connecting to the all-in-one

General SettingsRun MFP Manager when Windows startsExecute MFP Manager when Windows starts every time. By default, it is enabled.Minimized when starti

4.2 Search for All Available MFP Servers To run the Server Manager conguration utility, click the Search icon (left) on the tool bar

4.3 Status of the MFP Server Click the Status icon (left) on the tool bar. The status of the currently selected MFP server will be show

4.4 Set Up the MFP Server Click the Setup icon (left) on the tool bar. The setup items of the currently selected MFP server will be s

4.5 General CongurationDouble-click the General icon to display the login window, then enteryour username and password. The default values: Username

4.6 TCP/IP CongurationDouble-click the TCP/IP icon to display the TCP/IP conguration screen.You can congure the MFP server to automatically get an

4.7 System CongurationDouble-click the System icon to display the System conguration screen, where you can see all available printing protocols and

• “Enable” activates the wireless function only: The MFP server’s wireless LAN will be enabled and Ethernet will be disabled. • “Disable” de-ac

The table will list the available access points near the MFP server. Select an access point on the list and click “Next.” If you can’t nd the access

You can select “64 bit” or “128 bit” length and “Hexadecimal” or “ASCII” format for the encryption key. A longer key length can provide stronger secur

WPA-PSK & WPA2-PSK Security ModesBoth “WPA-PSK” and “WPA2-PSK” require that you select advanced encryption methods — i.e., TKIP or AES — and enter

You can choose to let the MFP server automatically obtain IP settings with DHCP Client or manually assign the IP settings. If you manually assign the

4.10 Report Click the Report icon (left) on the tool bar to display the Report screen. This lists basic information about all availab

Thank you for purchasing the INTELLINET NETWORK SOLUTIONS™ 1-Port MFP USB Wireless Print Server, Model 509077. Unlike many MFP (multi-function printi

5.3 Device Status5.3.1 System StatusSystem Information includes device name, MFP server name, model type, rmware version, MAC address, wireless con

computer and the all-in-one printer are connected.Ready: The printer is not connected to a user and is ready to use.Off Line: The printer is not con

MFP Server Name: The name of the MFP server, which you can use to identify the MFP server when you’re searching by using by the Server Manager utilit

TCP/IP Printing (LPR/IPP/RAW): The MFP server supports the TCP/IP network protocol and LPR/IPP/RAW printing protocols. By default, these protocols ar

ESSID: The unique name identied in a wireless LAN. The ID prevents any unintentional merging of two co-located WLANs. Make sure that the ESSIDs of

Key Length: Choose “64-bit” to use WEP with 64-bit key length encryption or choose “128-bit” to use WEP with 128-bit key length encryption. The long

WPA2-PSK Mode Security ModeTKIP: Temporal Key Integrity Protocol (TKIP) changes the temporal key every 10,000 packets, ensuring much greater security

You can congure the MFP Server to automatically get an IP address from the DHCP server or manually specify a static IP address.If you need the MFP se

5.5.2 Upgrade Firmware You can upgrade new rmware for this MFP server on this screen. Click “Browse” to select the new rmware, then click “OK.” The

1. On the desktop, go to Start, then Settings. Select “Printers and Faxes.”2. Click “Add a Printer.”3. When the Add Printer Wizard screen displays

frequency range to reduce the potential for harmful interference to co-channel mobile satellite systems. rss-210 ComplianCE statEmEntThe term “IC:” be

5. Choose “Create a new port” and “Standard TCP/IP Port.” Click “Next.”6. Make sure that the MFP server and the all-in-one printer (o

8. Select “Custom” and click “Settings.” When you’ve nished the settings in Step 9, click “Next” to continue.9. Select “LPR” and enter

10. Click “Finish.”11. Select the manufacturer and the printer model and click “Next.” If your printer is not on the list, click “Have

12. Choose whether or not to set the printer as the default printer. Click “Next.”13. Choose to print a test page or not. Click “Next.

14. You have successfully added the network printer to the PC. The information for the printer is displayed on the screen. Click “Finish.”NOTE: In Win

3. When the Add Printer Wizard screen displays, click “Next.”4. Select “Local Printer attached to this computer” and click “Next.”45

5. Choose “Create a new port” and “Standard TCP/IP Port.” Click “Next.”6. Make sure that the MFP server and the all-in-one printer (o

7. Enter the IP address of the MFP server in the “Printer Name or IP Address” eld. Click “Next.”8. Select “Custom” and click “Settings

9. Select “RAW” and then click “OK.” 10. Click “Finish.”48RAW PRINTING

11. Select the manufacturer and the printer model and click “Next.” If your printer is not in the list, click “Have Disk…” to instal

different power adapter could damage the MFP server.• Do not handle plugs with wet hands. Doing so may result in electric shock.• Do not use damag

14. You’ve added the network printer to the PC successfully. The information for the printer is displayed on the screen. Click “Finish.”.8. iPP Pri

3. When the “Add Printer Wizard” screen displays, click “Next.”4. Select “A network printer, or a printer attached to another comput

5. Select “Connect to a printer on the Internet or on a home or ofce network” and enter the URL of the MFP server. The URL format is “http://IP:631/

7. Choose whether or not to set the printer as the default printer. Click “Next.”8. You’ve added the network printer to the PC successfully

9. MFP Server inStallation With Mac oSLPR (Line Printer Remote) printing allows Macintosh computers to connect to printers via TCP/IP. LPR printing c

3. Click “Set Up Printers….”4. Click “Add” to add the new MFP server through TCP/IP.55SERVER INSTALLATION WITH MAC OS

5. On the Printer List screen, make the following entries/ selections. • Printer Type: LPD/LPR • Printer Address: Enter the IP address of t

10. troUBleShootingBelow are several questions and situations that may arise during your installation or use of the 1-Port MFP USB Wireless Print Ser

I can’t use the all-in-one printer to scan, print, use the card reader or fax a le even when I’ve followed the instructions in the manual.• Attach t

contentS1. MFP PRINT SERVER MODES... ... 72 USING YOUR ALL-I

INTELLINET NETWORK SOLUTIONS™ offers a complete line of active and passive networking products. Ask your local computer dealer for more information or

1. MFP Print Server ModeSThe 1-Port MFP USB Wireless Print Server supports two modes: All-in-One MFP Server mode and MFP Server mode. Users can choos

2. USing yoUr all-in-one PrinterAfter you’ve followed the install wizard to nish the all-in-one installation, you’re able to start sharing print, sc

NOTE: Once you’ve nished using the all-in-one printer, click “Disconnect” to release it. Other users can’t use the all-in-one printer until it’s rele